Closeup shot of the LLD Eco LED Recessed Niche Light in anodised aluminium.
Far shot of the Eco niche light by LLD.
LLD Eco recessed lights, installed as uplighters on steps in a commercial environment.
LLD Eco IP54 LED Recessed Niche / Floor Light| Image:1
Closeup shot of the LLD Eco LED Recessed Niche Light in anodised aluminium.
Far shot of the Eco niche light by LLD.
LLD Eco recessed lights, installed as uplighters on steps in a commercial environment.
LLD Eco IP54 LED Recessed Niche / Floor Light| Image:3

LLD Eco IP54 LED Recessed Niche / Floor Light

Manufacturer: LLD Light

£50

Description

The LLD Eco is a versatile light fitting which can be utilised in a variety of ways. Whether you use as a niche light due to its small size, low level lighting around stairways through its wide beam angle or even as uplighters in corridors as it’s resistant to being walked over (IK07).

Crafted from anti-corrosive aluminium and a PMMA lens. With a round bezel at 30mm in diameter, choose between 3 finishes: anodised aluminium, chrome-plated or matt white. With an IP54 rating, Eco can be installed in indoor environments where there may be some steam, including bathrooms.

Equipped with an energy efficient integral 1W LED light source at a wide 120° beam angle. Constant current and wired in series with a choice of 2700K, 3000K, 4000K or 5000K light temperatures.

Supplied with a 250mm cable. Can be installed in plasterboard or wood using the spring, or installed into brickwork using the housing box.

350mA driver required. 

Delivery usually within 2 weeks

Lightbulb with brain filament icon
- Our Top Tips -

  • With a shallow depth, Eco is versatile as to where it's installed - even in recesses with limited space
  • At IK07, the fixture can be walked over - suitable for floor installations
  • Series wiring with constant current will enable you to have the driver a longer distance from the fittings, up to 30m from the lights with the correct cable size
Specification

IP54
IK07 (durable for walking over)
1W, 350mA
Class III
Cutout: Ø27mm
250mm cable
Push, 1-10V, DALI, DMX and phase cut dimmable

Constant current - wired in series
350mA (1W) driver required

CCT | Lumens (1W-2W)
2700°K | 105lm
3000°K | 111lm
4000°K | 125lm
5000°K (on request)

Beam angle: 120°

Optional spring (ML025): W.56mm D.19mm
Optional housing box (CAE27): Ø32mm D.53mm

Lamp type: Integral LED: 1W, 350mA, CRI90+

Dimensions

Product dimensions: H.10mm x Diameter.33mm

Downloads
Delivery and warranty

Delivery usually within 2 weeks

Supplied with a 2 year warranty covering manufacturing and/or design defects. The warranty does not cover:

  • damage caused by transport
  • the use of products in unsuitable environmental conditions
  • non-standard product use or stress including under/over voltage
  • damage caused by negligence or lack of maintenance
  • damage caused by the use of power supplies not provided or indicated by LLD Light
  • repair attempts or tampering performed by unauthorised staff
About the manufacturer

With a heritage in nautical lighting, it's no surprise that LLD Light have evolved to become a prominent manufacturer of contemporary architectural indoor and outdoor lighting. Passionate about continual research and innovation, LLD combine innovative Italian design with the highest quality locally sourced materials. Each LLD light fitting, electronics and all, is produced in Vicenza - a true example of Made In Italy.

We're especially excited about their range of contemporary IP rated outdoor lighting - from adjustable spike spots and bollards, to wall lights and IP68 submersible underwater lights. Most are available in sleek and modern stainless steel, black or white, as well as COR-TEN stable rusted or in green to truly camouflage with the outdoor environment.

Got a question? Email us or call 01189 882294

It's good to be in the know



© 2020 Copyright Dark Light Design Limited. All rights reserved.

Registered Office:
Thor House, 49 Guildford Road
Bagshot, Surrey
United Kingdom, GU19 5NG

Company number: 07006711


Website by: