The DLD Lightflow 19.2W merges an IP66 rated water-tight silicon tubing with 238 LEDs per metre to produce a high output LED tape - superb for designing a minimalist and contemporary lighting effect in wet rooms, bathrooms and outdoor lighting projects. The 3000K colour temperature adds a warming light that is less amber than 2700K or halogen. Lightflow is perfect for installation with most profiles due to its 10mm width, and the LED strip offers a consistent 1594 lumens per metre with a 116° wide beam angle. 19.2W per metre and 24V and high CRI over 90. Supplied in a 5m roll with 3M self adhesive on the back, the tape can be cut every 7 LEDs (29.4mm) along the cut mark.
Suitable for use in both architectural and residential outdoor lighting schemes, and for installation in bathroom zones 1, 2 and 3. The added lumen output makes the 19.2W Lightflow ideal for commercial bathroom or outdoor projects. Also available in standard IP20 versions and in 3 colour temperatures: 2700°K soft white, 3000°K warm white or 4000°K neutral white.
Dimmable by 0-10V, PWM, TRIAC and DALI depending on driver - not supplied.
Wireless dimming from your smartphone
This Lightflow linear LED can also be used with the Casambi dimming units to give flexible control of the lighting in your home. Create the perfect mood for all situations wirelessly via Bluetooth 4.0 and save them as pre-set scenes on the Casambi app from your smartphone. Or control the scene at the touch of a button, either with Casambi wireless wall switches or with an off-the-shelf push dimmable on/off switch. See the 'You May Also Need...' section below for the available options and technical information.
Usually in stock with quick delivery
If not in stock delivery is usually 1-2 weeks
Recommended for installation with an aluminium profile, as this acts as a heat sink and prolongs the lifespan of the LED tape.
Got a question? Email us or call 01189 882294